Contact Us

183 Chisholm Crescent
Kewdale WA 6105

P: (08) 9359 0235
E: info at duralitetrailers dot com dot au

Parts Store

Download our Brochures


Alloy Bright finish propeller plate moulded wheel Guards

Available in:

  • Single
  • Tandem
  • Tri
tandem axle trailer tri axle trailer

Bunk Boards

Available in 12ft and 14ft length

Bunk boards are made of recycled poly/rubber compound.

tri axle trailer

Winch posts and winch brackets


Bow rollers cones and bow roller end bells


Couplers 50mm and 70mm galvanized


Narva boat trailer submersible LED light kits


Boat trailer winches electric and manual


Trailer bearing kits for both 5200lb axils and 3500lb axils


Hubs to suit 5200lb and 3500lb axels


5200lb hub kits suit 6 stud on 5in hub to suit Landcrusier wheel stud pattern


3500lb hub kits suit 5 stud on 4in hub to suit ford wheel stud pattern


Brake Rite

Easy installation. Compatible with all vehicle electrical connectors. Works with all brake controllers on the market.

The BrakeRite can easily be used with single, tandem and triple axle brake systems.

The BrakeRite has a larger more reliable motor which is able to maintain pressure for a longer period of time with less heat generation as it delivers 75 cubic inches per minute.

The pump and motor in the BrakeRite are mounted vertically to reduce stress in the mounting bolts and to take the weight off of the armature shaft and bearings.

The BrakeRite has a power saver feature which reduces the voltage as soon as full pressure is achieved. This reduces wear on the motor by reducing heat without reducing fluid pressure to the brakes.

Independent Results Prove That BrakeRite’s:

  • Brake response time is 3 times faster
  • Stopping distance is 30% shorter
  • Brake line pressure is 30% higher than both Carlisle and Ausco’s electric over hydraulic actuators.
  • BrakeRite is also the most reliable system, successfully completing more than 1 million cycles as independently verified.
Brake Rite

Disk Brakes

Advantages over Drum Brakes

  • Ability to operate at little fade at high temperatures of up to 1500° F
  • Linear relationship between brake torque and pad/rotor friction coefficient
  • Fewer moving parts enhances maintainability
  • Better corrosion characteristics
Disk Breaks